PENERAPAN PRINSIF KESEHATAN DAN KESELAMATAN KERJA DI UKM PANDE BESI TRADISIONAL

Authors

  • Rosleini Ria Putri Zendrato Setia Budi University
  • Sunardi Sunardi

DOI:

https://doi.org/10.33061/awpm.v4i1.3509

Abstract

Abstract

Partners in the Community Partnership Program activities are Pande Besi PRASOJO located in Nangsri Kidul RT 2 / IV Nangsri Kebakkramat Karanganyar and Pande Besi MANDIRI located at  Dondong RT 2/IX Klumprit Mojolaban Sukoharjo. The two partners are traditional blacksmiths. The problems faced by the two partners are relatively the same, namely: 1) traditional / conventional production processes; 2) do not apply the principles of Occupational Health & Safety. Solutions that will be carried out from this activity are: 1) production of blower and grinding tools; 2) the use of personal protective equipment (PPE). The method that will be carried out to realize the objectives of the PKM implementation program is through: 1) Procurement of electric blowers and grinders for both partners; 2) Increased knowledge and training in the use of personal protective equipment (PPE). In this method both partner SMEs are involved in each activity starting from problem identification, action analysis, action planning and implementation of activities. Through this method, the identified problems and actions to be taken are bottom up proposals. So that every action that will be carried out is right on target and is able to realize the objectives to be achieved maximally. The results of the Community Partnership Program activities were Pande Besi PRASOJO and Pande Besi MANDIRI succeeded in increasing the quantity and quality of products through the procurement of blower and grinding tools. Both partners have also implemented occupational health and safety principles through increased knowledge and use of PPE.

Downloads

Download data is not yet available.

Author Biography

Rosleini Ria Putri Zendrato, Setia Budi University

Analysis Chemistry, Faculty of Tecnic, Setia Budi University

References

Abdullah, I. 2016. Krisis Ekonomi, Daya Tahan Penduduk, dan Social Security: Kasus Jatinom di Jawa Tengah. Populasi, 10(1).

Andhita, R., & Oginawati, K. 2016. Analisis Konsentrasi Kristal Silika Terinhalasi di Lingkungan Kerja Pandai Besi Desa Mekarmaju, Kabupaten Bandung. In Seminar Nasionall Sains dan Teknologi Lingkungan II (pp. 27–32).

Asmara, A. Y., & Handoyo, S. 2015. Pembuatan Kebijakan Berbasis Bukti: Studi Pada Proses Pembuatan Kebijakan Standardisasi Alat dan Mesin Pertanian di Indonesia. STI Policy and Management Journal, 13(1), 38–57.

Braz, N. F. T., Carneiro, A. P. S., de Avelar, N. C. P., de Miranda, A. S., Lacerda, A. C. R., Teixeira, M. M., Mendonça, V. A. 2016. Influence of Cytokines and Soluble Receptors in the Quality of Life and Functional Capacity of Workers Exposed to Silica. Journal of Occupational and Environmental Medicine, 58(3), 272–276.

Budhi, G. S. 2016. Dilema Kebijakan dan Tantangan Pengembangan Diversivikasi Usaha Tani Tanaman Pangan. Analisis Kebijakan Pertanian, 8(3), 241–258.

Chen, W., Liu, Y., Wang, H., Hnizdo, E., Sun, Y., Su, L., Wu, T. 2012. Long-term exposure to silica dust and risk of total and cause-specific mortality in Chinese workers: A cohort study. PLoS Medicine, 9(4).

Cohen, R. A., Petsonk, E. L., Rose, C., Young, B., Regier, M., Najmuddin, A., … Green, F. H. Y. 2016. Lung Pathology in U.S. Coal Workers with Rapidly Progressive Pneumoconiosis Implicates Silica and Silicates. American Journal of Respiratory and Critical Care Medicine, 193(6), 673–680.

Gobba, N. A. E. K., Hussein Ali, A., El Sharawy, D. E., & Hussein, M. A. 2017. The potential hazardous effect of exposure to iron dust in Egyptian smoking and nonsmoking welders. Archives of Environmental & Occupational Health, 1–14.

Hofmann, T., Ma-Hock, L., Strauss, V., Treumann, S., Rey Moreno, M., Neubauer, N., Landsiedel, R. 2016. Comparative short-term inhalation toxicity of five organic diketopyrrolopyrrole pigments and two inorganic iron-oxide-based pigments. Inhalation Toxicology, 28(10), 463–479.

Kompas.com. 2016. Impor Cangkul Menghina Harga Diri Bangsa Indonesia. Retrieved May 23, 2017, from http://bisniskeuangan.kompas.com/read/2016/11/01/061349526/ini.penjelasan.pemerintah.soal.cangkul.impor

Merdeka.com. 2016. Pemerintah Indonesia impor cangkul dari China. Retrieved from https://www.merdeka.com/uang/pemerintah-indonesia-impor-cangkul-dari-china.html

Mirdha, P., Solanki, S., & Singh, B. 2016. Deterioration of pulmonary function with duration of exposure to silica dust in stone crusher workers. Indian Journal of Clinical Anatomy and Physiology, 3(4), 544–546.

Pease, C., Rücker, T., & Birk, T. 2016. Review of the Evidence from Epidemiology, Toxicology, and Lung Bioavailability on the Carcinogenicity of Inhaled Iron Oxide Particulates. Chemical Research in Toxicology, 29(3), 237–254.

Poinen-Rughooputh, S., Rughooputh, M. S., Guo, Y., Rong, Y., & Chen, W. 2016. Occupational exposure to silica dust and risk of lung cancer: an updated meta- analysis of epidemiological studies. BMC Public Health, 16, 1–17.

Rahmuniyati, M. E., Rahfiludin, Z., & Kartini, A. 2016. Pengaruh Pemberian Air Minum dan Air Glukosa terhadap Status hidrasi dan Kelelahan Pekerja Pande Besi. Jurnal Formil (Forum Ilmiah) KESMAS RESPATI, 1(2).

Simatupang, P. 2016. Analisis Kritis terhadap Paradigma dan Kerangka Dasar Kebijakan Ketahanan Pangan Nasional. Forum Penelitian Agro Ekonomi, 25(1), 1–18.

Sindonews.com. 2016. Impor Cangkul Menghina Harga Diri Bangsa Indonesia. Retrieved from https://ekbis.sindonews.com/read/1151271/34/impor-cangkul-menghina-harga-diri-bangsa-indonesia-1477794258

Sodikin, I., Waluyo, J., & Pratiwi, Y. 2016. Rancang Bangun Tungku Pemanas untuk Pande Besi yang Ramah Lingkungan Guna Meningkatkan Kapasitas Produksi Alat Pertanian. In Simposium Nasional ke 15 RAPI (pp. 458–463). Surakarta: Fakultas Teknik Universitas Muhammadiyah Surakarta.

Supriyanto, A. 2016. Mengenal Sejarah Pande Besi Tradisional. Ornamen, 8(1).

Surojo, E., & Triyono, J. 2017. Pengaruh Bahan Energizer pada Proses Pack Carburizing terhadap Kekerasan Cangkul Produksi Pengrajin Pande Besi. Mekanika, 6(2).

Susilowati, S. H., & Simatupang, P. 2016. Faktor-Faktor yang Menentukan Pemilihan Teknik Pengolahan Tanah pada Usahatani Padi. Jurnal Agro Ekonomi, 9(2), 67–76.

Suwanto, J. 2016. Hubungan Antara Risiko Postur Kerja Dengan Risiko Keluhan Muskuloskeletal Pada Pekerja Bagian Pemotongan Besi Di Sentra Industri Pande Besi Padas Klaten. Universitas Muhammadiyah Surakarta.

Widjajani, & Gatot Yudoko. 2008. Keunggulan Kompetitif Industri Kecil Di Klaster Industri Kecil Tradisional Dengan Pendekatan Berbasis Sumber Daya: Studi Kasus Pengusaha Industri Kecil Logam Kiara Condong, Bandung. Jurnal Teknik Industri, 10(1), 50–64.

Witjaksono, M. 2015. Modal Sosial dalam Dinamika Perkembangan Sentra Industri Logam Waru Sidoarjo. Jurnal Ekonomi Pembangunan, 11(2), 266–291.

Zhang, X., Li, Y., Xiao, X., Dai, W., Luo, G., & Li, X. 2016. Clinical Evaluation of Three Methods of Lung Lavage in Treatment of Pneumoconiosis. Chest Journal, 149(4), A412.

Downloads

PlumX Metrics

Published

2020-05-09

How to Cite

Zendrato, R. R. P., & Sunardi, S. (2020). PENERAPAN PRINSIF KESEHATAN DAN KESELAMATAN KERJA DI UKM PANDE BESI TRADISIONAL. Adi Widya : Jurnal Pengabdian Masyarakat, 4(1). https://doi.org/10.33061/awpm.v4i1.3509

Issue

Section

Artikel